How to setup Wi-Fi router
A router is a device that communicates between the Internet in your home and the devices that connect to the Internet. As its name implies, it is “route” traffic between devices and the Internet. With the right kind of router in your home, you can be able to enjoy fast internet service, help protect your family from cyber-attack, and avoid those crazy Wi-Fi dead spots. You must be a computer genius to know what a good router has to offer. Everyone wants to know what you need for it. Understanding how routers work will help you choose the right equipment for your home.
How is it works
A typical home has a range of Internet-connected devices – personal computers, tablets, smartphones, printers, thermostats, smart TVs, and more. With your router, these devices form a network. A router directs incoming and outgoing Internet traffic to that network in the fastest and most efficient way. Information traveling on your home network can be an email, a movie, or a live feed from your baby cam, each of which has different amounts of bandwidth. Ensuring that information is delivered quickly and correctly is a big task – and big. As you add more and more devices – Think Internet of Things – you ask your router to do more.
Check Your Internet Connection
If you are connecting your router to an existing modem or ISP gateway, you probably already have a good idea of whether your Internet is working or not, but it is always worth checking. A bad connection can make for a long and frustrating attempt at a router installation when nothing can go wrong with the router. If you are installing your router as part of moving to a new home or apartment, it is more important to make sure that you have an active Internet connection, as you can connect your router to a newly installed or active Internet Possibility to install with. Service. To check the Internet status, simply connect to your modem or ISP gateway using an Ethernet cable, and plug it directly into your laptop or desktop PC. (If you do not have an Ethernet port on your laptop, you may want to get an Ethernet adapter.) If your computer is getting an Internet connection, then you are in good shape to set up the router.
Place the Router
As you unpack the router, pay attention to any documentation involved. Keep an eye out for any stickers or slips of paper that may contain important setup information, such as the address for the router’s web interface, or the default username and password. If the antennas are separate from the main router unit, you will want to install them. This is usually done by screwing them on the connectors on the back or sides of the router. In other cases, the router’s antennas will be built, and only need to be extended and deployed. Once it is unpacked and assembled, you need to find a place to install the router. The ideal router position would be at a central location rather than at one end of the house. Since the router transmits in all directions, you want to place it in the middle of your home to get the best coverage and signal strength.
Connect to power
Once it turns on, you should activate the router’s indicator light. Some will blink or change color during the setup process, indicating some functions and changes, but there should be a light that shows that the router is properly plugged in and powered on. Wait a minute or two after plugging in the router, as it may take some time to get up and running.
Connect to Your Internet Source
To solve the “long distance” problem when connecting a router, you can use CAT5e or CAT6 cable to connect the router to the Ethernet port of the ISP gateway. Another option is to run an Ethernet cable through the walls of your office to the central location chosen for the router. Yet another option is to set up a mesh network with a router. A mesh network allows you to place multiple Wi-Fi transmitters in your home or office on one network. Unlike Extender, which can be used with any wireless router, the mesh network requires a router with this capability. No matter which option you choose, you will use a basic Ethernet cable, plugged into the router’s wide-area network (WAN) or Internet port. The Internet port is usually set by a different color from other ports.
Check the router’s LED lights
Test the connection with a device
Access the Router’s Web Interface
While you have a computer connected to the new router, now would be an ideal time to set a new network name and password. Additionally, you will need to log into the same web interface to upgrade your firmware, adjust your security settings, and activate your Wi-Fi. See our handy guide to walk through the process or follow the instructions that came with the router.
Connect Wired Devices
If you want to physically connect any device to your router, such as a printer, game console, TV or Internet phone system, you will need an Ethernet cable for each. Plug a wired device into one of the available ports on the back of the router. Once your Wi-Fi network is up and running, you want to connect the rest of your devices. If you haven’t already, you may want to set a new name and password for the router, and need to know both the network name and password to log in to your new Wi-Fi network.